Printers
Printer Not Printing Black Even Though the Ink Is Full
Written by Free Tech Support Editorial Team · Updated
It is a common and confusing problem: a printer not printing black, even though the ink level shows the black cartridge is full and colors print perfectly. Text comes out faint, streaky, or not at all. In most cases the ink is fine and the problem is a dried nozzle, a setting, or a poor connection between the cartridge and the printer. Work through the steps below in order; the first two fix most cases.
This is an independent guide that covers inkjet printers from HP, Canon, Epson, Brother and others. For warranty or cartridge replacement questions, use your printer maker’s own support site.
Why black stops printing when the ink is full
- Dried or clogged nozzles. The black ink used for text on many inkjets is a thicker pigment ink. If the printer sits unused for a few weeks, those nozzles can dry out while the color nozzles keep working.
- Air in the cartridge or ink lines. This can happen after a cartridge swap or with refilled cartridges.
- Dirty contacts. The small copper contacts on the cartridge tell the printer what is installed. Dirt or ink on them can stop the cartridge firing.
- Settings. Some print settings tell the printer to make “black” from mixed colors, or to use a different black cartridge than the one you think.
- The ink level is only an estimate. The gauge counts ink used; it does not see a clog or a faulty cartridge.
Step 1: Print a nozzle check
A nozzle check (sometimes called a print quality report or diagnostic page) prints a test pattern for each ink. It tells you whether the problem is the printer or your computer.
- Look on the printer’s own screen for a Setup, Maintenance or Tools menu, or use the maker’s app on your computer or phone (for example HP Smart, Canon’s printer utility, or Epson’s printer utility).
- If the black part of the pattern is missing or broken, the printer has a clog or cartridge problem. Go to Step 2.
- If the pattern prints black perfectly but your documents do not, skip to Step 5, as the problem is a setting.
Step 2: Run a printhead cleaning cycle
- In the same maintenance menu, choose the cleaning option. It may be called Clean Printhead, Head Cleaning or Cleaning.
- Let the cycle finish completely without opening the printer.
- Print another nozzle check.
- If black improved but is not perfect, run one more cycle.
- If there is no change after two or three cycles, stop. Turn the printer off and leave it for several hours, or overnight, then try again. Rest time lets ink soak into a stubborn clog.
Many printers also have a deep or power cleaning option. It works harder but uses much more ink, so save it for when normal cleaning has failed. On ink tank printers (refillable tank models), check that the tank is above its minimum line, because a low tank can let air into the lines. For more detail, see our guide to fixing faded or streaky prints by cleaning printheads.
Step 3: Check the cartridge itself
Turn the printer on, open the access door, and wait for the carriage to move to the change position.
- Remove the black cartridge. Check that all protective tape and plastic caps are gone. New cartridges often have a pull tab or a clear strip over the nozzles.
- Look at the copper contacts. If they are dirty, wipe them gently with a lint-free cloth lightly dampened with distilled water. Do not touch the nozzles with your fingers.
- Reinsert the cartridge firmly until it clicks, close the door, and print a nozzle check.
If you have a spare original cartridge, try it. If black returns with the new cartridge, the old one was faulty or dried out. If you use refilled or third-party cartridges, note that some printers reject them after a firmware update, even if they worked before.
Step 4: Check printhead alignment and printer updates
After cleaning, run Align Printhead (or Print Head Alignment) from the maintenance menu. Poor alignment can make black text look faded or doubled. While you are there, check whether the maker’s app reports a firmware update; install it if offered from the printer’s own menu or the maker’s official app.
Step 5: Check your print settings
If the nozzle check shows black working but your pages do not, look at the settings in the print dialog. On Windows 11, choose Printer Properties or Preferences in the print window, or go to Settings > Bluetooth & devices > Printers & scanners, select the printer, and choose Printing preferences. On a Mac, look in the print dialog’s option menus.
| Setting | What to check |
|---|---|
| Paper type | Set it to Plain paper for documents. On some printers, choosing a photo paper type uses a different black ink and skips the main black cartridge. |
| Color mode | If Grayscale or Black ink only is selected, try switching it, and vice versa. Some drivers build gray from color inks in grayscale mode. |
| Print quality | Draft mode uses less ink and can look very faint. Try Standard. |
| Document text color | In Word or Google Docs, check that the text is set to black, not a pale gray. |
If the settings look right but documents still print wrong, the driver may be damaged. Our guide on printer driver unavailable errors shows how to reinstall it cleanly.
When to stop and get help
If a fresh original cartridge, several cleaning cycles with rest time, and correct settings do not bring black back, the printhead itself may have failed. On printers where the printhead is built into the cartridge, a new cartridge replaces it. On printers with a fixed printhead, the maker’s support or a local repair shop can tell you whether replacement is worth it, compared with the cost of a new printer.
When looking for help, go to the maker’s website by typing its address yourself. Search ads sometimes show fake “printer support” phone numbers, and genuine support will not ask you to install remote-access software or pay with gift cards.
Related guides
If your printer is also giving other trouble, see printer printing blank pages, print queue stuck and won’t clear, or HP printer in an error state. You can also browse every guide in the printers section.
Frequently asked questions
Why does my printer print color but not black?
Black and color inks come out of separate nozzles. If the black nozzles dry out or clog, color keeps working while black prints faint or not at all.
How many cleaning cycles should I run?
Run one, print a nozzle check, and run a second only if it improved. If two or three cycles show no change, let the printer sit for a few hours before trying again, because repeated cycles use a lot of ink.
Can I print black using the color inks while I wait for a new cartridge?
Some printers let you choose a grayscale or composite black option in the print settings. The result may look slightly brown or gray and uses more color ink, and not every model offers it.
My black cartridge is brand new and still not printing. What is wrong?
Check that all protective tape is removed and that the cartridge clicks firmly into place. If a nozzle check still shows no black after a cleaning cycle, the cartridge may be faulty, so return it to the seller.
Will a third-party or refilled cartridge cause this?
It can. Some refilled cartridges have air pockets or worn nozzles, and some printers stop accepting non-original cartridges after a firmware update. Try an original cartridge to rule it out.
Sources
Free Tech Support Editorial Team
Editorial team
The Free Tech Support editors write and update these guides from the official documentation of Microsoft, Apple, Google and device makers. We are an independent site with no phone line and no paid support service.
