Phones & Tablets
Android Won't Connect to Wi-Fi: Step-by-Step Fixes
Written by Free Tech Support Editorial Team · Updated

When your Android Wi-Fi is not connecting, the cause is usually one of a few things: a wrong or outdated saved password, a router that needs a restart, or a phone setting such as Private DNS, a VPN or MAC address randomization that the network does not like. Work through the fixes below in order. They start with the quickest and most likely, and finish with a network settings reset.
Android menus vary by maker. This guide gives paths for Google Pixel (close to standard Android) and Samsung Galaxy phones; other brands such as Motorola or OnePlus are usually similar to Pixel. If your menu looks different, use the search bar at the top of the Settings app. This is an independent guide, not affiliated with Google or Samsung.
Step 1: Work out whether it is the phone or the router
- Other devices fail too? The router or internet service is the problem. Restart the router: unplug it, wait 30 seconds, plug it back in and give it a few minutes. See our guide to restarting a router correctly.
- Only your Android fails? Continue with the steps below.
- Your network does not appear in the list at all? See our guide on Wi-Fi that won’t show up.
Step 2: Toggle Wi-Fi and restart the phone
- Swipe down from the top of the screen and turn Wi-Fi off, wait ten seconds, and turn it on again.
- Turn Airplane mode on and off.
- Restart the phone. On many phones, press and hold the power button (or power and volume up together on some Pixel and Samsung models) and choose Restart.
Step 3: Forget the network and join it again
A stale saved entry is one of the most common causes, especially after the Wi-Fi password or router changed.
Pixel: go to Settings > Network & internet > Internet, tap the gear next to your network, and tap Forget.
Samsung: go to Settings > Connections > Wi-Fi, tap the gear next to your network, and tap Forget.
Then tap the network name and enter the password again. Passwords are case-sensitive. If you are not sure of it, our guide to finding a forgotten Wi-Fi password shows where to look.
Step 4: Read the error message
| Message | What it usually means | What to try |
|---|---|---|
| Authentication problem / Check password | Wrong password or security mismatch | Forget and rejoin; check the router’s security setting |
| Obtaining IP address (stuck) | Router not giving the phone an address | Restart router; change MAC setting (Step 6) |
| Connected, no internet | Network joined but no route to the internet | Restart router; check Private DNS and VPN (Step 5) |
| Saved, but never connects | Weak signal or band issue | Move closer; try the other band (Step 7) |
| Sign in to network | Public or hotel Wi-Fi needs a login page | Tap the notification to open the sign-in page |
Step 5: Check Private DNS and VPN apps
A custom DNS server that is down or blocked can make Wi-Fi look broken.
- Pixel: Settings > Network & internet > Private DNS.
- Samsung: Settings > Connections > More connection settings > Private DNS.
Set it to Automatic and test again. If you rely on a particular DNS service, see our guide to changing DNS to 1.1.1.1 or 8.8.8.8.
If you use a VPN, ad blocker or security app that routes traffic, turn it off or pause it and test. Some VPNs block all traffic when they cannot connect.
Step 6: Change the MAC address setting
Android uses a randomized MAC address on each network for privacy. Some routers with device filters, parental controls or reserved addresses do not recognize it.
- Pixel: open the network’s settings (gear icon), then Privacy, and switch between Use randomized MAC and Use device MAC.
- Samsung: open the network’s settings, tap View more, then MAC address type, and switch between Randomized MAC and Phone MAC.
Reconnect after changing it. If the router has a device allow list, add the phone or turn the filter off.
Step 7: Check router band and security compatibility
- 2.4 GHz vs 5 GHz: 2.4 GHz reaches further but is slower; 5 GHz is faster but shorter range. If your router has separate network names for each, try the other one. Our guide on 2.4 GHz vs 5 GHz explains how to switch.
- Security type: if the router was set to WPA3 only, older phones may not connect. A mixed WPA2/WPA3 mode in the router settings usually works for everyone.
- Too many devices: some routers limit how many devices can connect. Restarting the router or removing unused devices can help.
Step 8: Update the phone and check date and time
- Install updates: on Pixel, Settings > System > Software updates; on Samsung, Settings > Software update > Download and install.
- Make sure the date and time are set automatically, as a wrong clock can stop secure connections and sign-in pages from working.
Step 9: Reset network settings
This clears all saved Wi-Fi networks and passwords, Bluetooth pairings and some mobile data settings. Your photos, apps and messages are not affected.
- Pixel: Settings > System > Reset options > Reset Wi-Fi, mobile & Bluetooth.
- Samsung: Settings > General management > Reset > Reset network settings.
After the reset, rejoin your Wi-Fi network and re-pair Bluetooth devices. If mobile data stops working afterward, see our guide on mobile data not working.
Step 10: Test in safe mode
A recently installed app can interfere with Wi-Fi. Safe mode starts the phone with only built-in apps. On most phones, press and hold the power button, then touch and hold Restart or Power off until Safe mode appears. If Wi-Fi works in safe mode, uninstall recent apps one by one, then restart normally.
When to get help
If Wi-Fi will not turn on at all, the toggle greys out, or the phone cannot see any networks after a reset, the Wi-Fi hardware may be faulty, especially after a drop or water exposure. Contact the phone maker’s support or your carrier, or visit a reputable repair shop. Be cautious of search ads or pop-ups offering phone or remote “Wi-Fi repair”; genuine support will not ask you to install remote-access apps for this.
Related guides
Using an iPhone too? See iPhone won’t connect to Wi-Fi. For router-side improvements, see boosting a weak Wi-Fi signal. If mobile data also misbehaves, see mobile data not working. You can also browse every guide in the mobile section.
Frequently asked questions
Why does my Android phone say Connected, no internet?
The phone has joined the Wi-Fi network but cannot reach the internet through it. Restart the router, check whether other devices are online, and set Private DNS to Automatic if you changed it.
What does Authentication problem or Check password mean?
The phone is using the wrong Wi-Fi password or a security type the router does not accept. Forget the network and rejoin it, typing the password carefully; it is case-sensitive.
My phone is stuck on Obtaining IP address. How do I fix it?
The router is not handing out an address. Restart the router, forget and rejoin the network, and try switching the network's MAC address setting between randomized and device MAC.
Will resetting network settings delete my data?
No. It removes saved Wi-Fi networks and passwords, Bluetooth pairings and some mobile network settings, but your photos, apps and messages stay.
Wi-Fi works on every other device except my Android. Why?
The phone's saved network entry or settings are usually to blame. Forget the network, check for a VPN or custom Private DNS, and reset network settings if needed.
Sources
Free Tech Support Editorial Team
Editorial team
The Free Tech Support editors write and update these guides from the official documentation of Microsoft, Apple, Google and device makers. We are an independent site with no phone line and no paid support service.
