Wi-Fi & Internet
How to Fix "No Internet, Secured" on Windows 11
Written by Free Tech Support Editorial Team · Updated
The Wi-Fi icon has a small globe or warning sign, and under your network name Windows says “No Internet, Secured”. It looks contradictory, but it is precise: “Secured” means you joined a password-protected network correctly, and “No Internet” means nothing gets beyond the router. This guide shows how to find out whether the problem is the PC, the router or the internet provider, and how to fix each one.
This is an independent guide for Windows 11; Windows 10 shows the same message and most steps are the same.
Step 1: Check other devices
Pick up your phone, turn off mobile data, and try a website on the same Wi-Fi.
- Nothing works on any device: the router, modem or internet service is down. Go to step 2.
- Other devices work, only the PC fails: skip to step 3.
Step 2: Restart the modem and router
- Unplug the power from both the modem and the router (or the single combined box).
- Wait 30 seconds.
- Plug in the modem first and wait until its lights settle, usually one to two minutes.
- Plug in the router and wait another minute or two.
If nothing works after that, check your internet provider’s outage page or app from your phone’s mobile data. Our guide to restarting a router correctly explains the status lights. If only some websites fail, see DNS server not responding.
Step 3: Forget the network and reconnect
- Go to Settings > Network & internet > Wi-Fi > Manage known networks.
- Select your network and choose Forget.
- Reconnect from the Wi-Fi icon in the taskbar and enter the password again.
Step 4: Renew the IP address and flush DNS
- Right-click Start and choose Terminal (Admin).
- Type each command and press Enter after each one:
ipconfig /release
ipconfig /flushdns
ipconfig /renew
If ipconfig /renew reports an error or the address starts with 169.254, the PC is not getting an address from the router; see self-assigned IP or limited connectivity.
Step 5: Turn off VPN, proxy and security add-ons
- VPN: disconnect or quit any VPN app and test again.
- Proxy: go to Settings > Network & internet > Proxy. Under Manual proxy setup, make sure Use a proxy server is off unless your workplace set it.
- Security software: some third-party firewalls and “web protection” tools block traffic after an update. Temporarily turn them off to test, then update or reinstall them.
An unknown proxy you did not set can be a sign of adware; see remove browser pop-ups and redirects.
Step 6: Public Wi-Fi sign-in pages
On hotel, airport, café and library networks, “No Internet, Secured” often means you have not accepted the sign-in page yet. Open a browser and type a simple address such as example.com. The login page should appear. If it does not, turn off VPNs and custom DNS (step 7) for now, as they can block it.
Step 7: Change the DNS server
If your provider’s DNS servers are failing, switching DNS can bring the connection back.
- Go to Settings > Network & internet > Wi-Fi and select your network’s properties.
- Next to DNS server assignment, select Edit and choose Manual.
- Turn on IPv4 and enter a public DNS service, for example
1.1.1.1and1.0.0.1, or8.8.8.8and8.8.4.4. - Save and test.
Our guide to changing DNS to 1.1.1.1 or 8.8.8.8 has more detail and explains how to switch back.
Step 8: Run the network troubleshooter and update the driver
- Go to Settings > System > Troubleshoot > Other troubleshooters and run Network and Internet.
- Right-click Start, open Device Manager, expand Network adapters, right-click your Wi-Fi adapter and choose Update driver. If the problem started after an update, choose Properties > Driver > Roll Back Driver instead.
- In the adapter’s Properties > Power Management tab (if present), untick Allow the computer to turn off this device to save power.
Step 9: Reset the network settings
When nothing else works, a network reset reinstalls the network adapters and restores default settings.
- Go to Settings > Network & internet > Advanced network settings > Network reset.
- Select Reset now and confirm.
- The PC restarts. Reconnect to Wi-Fi.
You will need to re-enter Wi-Fi passwords and reinstall VPN clients. See reset network settings in Windows for what is affected.
When it only happens sometimes
- After sleep or hibernation: the Wi-Fi adapter may not wake properly. Turn off its power saving (step 8) and install the latest Wi-Fi driver from the laptop maker.
- At busy times of day: your internet provider’s service may be congested or dropping. Run a speed test when it works and when it fails; see test your internet speed.
- Only on one network: at a workplace, school or hotel, the network may block devices that have not registered or accepted terms. Ask the network’s administrator.
- When many devices are connected: some routers limit the number of devices or run out of addresses. Restart the router and disconnect devices you do not use; if it happens often, the router may need replacing; see set up a new router.
Still no internet?
If an Ethernet cable works but Wi-Fi does not, the Wi-Fi adapter or router’s wireless side is at fault; see Wi-Fi works on phone but not laptop. If the cable fails too, see Ethernet connected but no internet. For the closely related “Connected, no internet” message, see Wi-Fi connected but no internet. Browse more in the Wi-Fi and internet section.
Frequently asked questions
What does No Internet, Secured mean?
Secured means you joined a password-protected Wi-Fi network successfully. No Internet means Windows tested the connection and could not reach the internet through it. The fault can be in the router, the internet provider or the PC's settings.
Why do I get No Internet, Secured only on my laptop?
If phones and other devices work on the same Wi-Fi, the problem is on the laptop: an IP or DNS setting, a VPN or proxy, a security app or the Wi-Fi driver. Forgetting and rejoining the network, renewing the IP and a network reset usually fix it.
How do I fix No Internet, Secured on hotel or airport Wi-Fi?
Open a browser and go to any simple web address to trigger the network's sign-in page, then accept the terms or enter the room details. Turn off VPNs and custom DNS first, as they can stop the sign-in page appearing.
Will a network reset delete my files?
No. A network reset only removes network adapters, saved Wi-Fi networks and network settings. You will need to reconnect to Wi-Fi and reinstall VPN software afterwards.
Sources
Free Tech Support Editorial Team
Editorial team
The Free Tech Support editors write and update these guides from the official documentation of Microsoft, Apple, Google and device makers. We are an independent site with no phone line and no paid support service.
